Introduction to the types of aquatic aerators

Aquaculture ponds have different depths of water, different feeding densities, and different aerators to be equipped. In order to achieve high-yield and high-efficiency purposes, the use of various pond aerators should be purchased by aquatic breeders according to actual needs. Aeration type aerators (also called inflatable aerators) Five types of pond aerators and their characteristic hosts are air compressors or blowers.

Aquaculture ponds have different depths of water, different feeding densities, and different aerators to be equipped. In order to achieve high-yield and high-efficiency purposes, the use of various pond aerators should be purchased by aquatic breeders according to actual needs. Aeration type aerators (also called inflatable aerators) Five types of pond aerators and their characteristic hosts are air compressors or blowers.

When the air is pressurized and passes through the sand filter element or microporous plastic tube of the underwater device, the fine air bubbles are discharged, and the water movement is formed during the rising process of the air bubbles. The machine is suitable for deep-water fish ponds. Jet type aerator Five types of pond aerators and their respective characteristics This aerator is composed of a submersible pump and a jet tube.

During operation, the water in the pump is ejected from the nozzle in the jet tube at a high speed, and the air is sucked in by negative pressure. The water and the air are mixed in the mixing chamber, and then pressed out by the dispersion tube, and the dissolved oxygen will be dispersed along the water flow in a straight line. Because this aerator has no rolling machinery under water and will not damage the fish, it is very suitable for deep-water fish ponds with high fish culture density.

Water spray aerator Pond aerator and its own characteristics The machine uses a water pump to send water into the sprinklers installed in the middle of the fish pond and on the shore, so that the water sprays and falls in the form of rain, so that the water and the air touch to add dissolved oxygen intention of. This machine is only suitable for small fish ponds with shallow water. Waterwheel aerator Five types of pond aerators and their respective characteristics When the machine works, the paddles hit the water at a high speed, stirring the air into the water to achieve the purpose of aeration. This aerator is suitable for shallow ponds, it will not stir the bottom mud, and can keep the water fresh.

Impeller type aerator pond aerator and its respective characteristics This machine adds dissolved oxygen in the water through the principle of mixing water and aeration, with good oxygenation effect and high power efficiency. There are many types according to the size of the motor power. When in use, the whole machine floats in the center of the pond and is fastened to the edge of the pond with a rope. During the operation, the impeller rotates and mixes the water body, resulting in the effect of lifting and propelling the water body to mix, so that convection occurs up and down the water layer, and the dissolved oxygen in the entire water body tends to be balanced. Generally, the depth of the pool is 1.5-2 meters.