Provide you with the latest enterprise and industry news.
Roots aerator works:
It is mainly a constant volume rotary blower that compresses and transports gas through relative movement of two three-lobed rotors in the cylinder. This kind of blower keeps the two rotors in mesh by means of a synchronous gear at the end of the rotor shaft. Each concave curved surface part on the rotor and the inner wall of the cylinder form a working volume. During the rotation of the rotor, the gas is taken away from the suction port, and when it is moved to the vicinity of the exhaust port, it is connected with the exhaust port, and the gas is transported to the exhaust channel. . The two rotors work alternately in turn. The two rotors are not in contact with each other, and they are sealed by a tightly controlled gap, so the discharged gas is not polluted by lubricating oil.
Roots aerator features:
The gas pulsation is small, the vibration is also small, and the noise is low. The blower has a simple structure and is convenient to manufacture. The aeration pipe is suitable for gas transportation and pressurization, and can also be used as a vacuum pump.
Application advantages of Roots aerator:
1: Stable air output: In aquaculture, the general aquaculture area is relatively large, and there are also specialized aquaculture plants that use this Roots aerator! The main advantage is that it is stable in operation and stable in air output! Because the pressure of this type of fan is high, it cannot be achieved by the vortex fan. When the depth of the pool is greater than 2.5 meters, it is a bit difficult to use the vortex fan to increase oxygen. Therefore, it is recommended that users also use the Roots aerator in aquaculture. Although the price is a little higher than the vortex fan, the performance is different. the effect is different
2: Simple daily maintenance: In the daily work of the Roots aerator, the user does not need to perform regular maintenance, but only needs to check the fuel tank at regular intervals and add a little butter to the gear position at the same time! This is much simpler to maintain than other types of fans. Even if you forget to refuel the Roots aerator for 1-2 months, it can still be used normally! More durable and long service life!
The use of Roots aerator with microporous aeration tube:
Application of microporous aeration and oxygenation tube:
1. Increase the breeding density and increase the breeding output
2. Maintain good water quality and greatly reduce the occurrence of diseases
3. Improve the quality of aquaculture products and increase the efficiency of aquaculture
4. All-round three-dimensional mute oxygenation to prevent stress reflection
5. Effectively increase the dissolved oxygen in the anoxic layer of the water body and keep the water body flowing
6. Effectively reduce the concentration of ammonia, nitrogen, hydrogen chloride, sub-salt and other harmful substances
Traditional aerators rely on mechanical movement to stir the water surface to increase oxygen, and its aerobic effect is limited to the local water surface on the surface, and cannot reach the bottom layer that is truly anoxic. When the hypoxia is turned on, a large number of fish and shrimp are close to the aerator, but the local hypoxia is serious and the purpose of aeration is not achieved; its mechanical movement can easily cause fish and shrimp casualties.
Microporous oxygenation is the aeration tube at the bottom of the water supplied by the power supply on the shore. The bubbles are small, the rise is slow, the contact surface with the water is large, and the omnidirectional three-dimensional silence greatly increases the oxygen content in the water; The bottom-up airflow can prolong the floating time of the feed in the water, thereby improving the utilization rate of the feed and reducing the cost of breeding; the installation adopts the method of more than one mu of trays and one machine of more than one mu. Electricity 80%