Provide you with the latest enterprise and industry news.
The aeration tube is a new type of aeration aerator. The thin wall and straight channel greatly reduce the loss of aeration resistance; the variable hole and the slit automatically open and close, completely solve the problem of blockage of the aerator; the hose is linear aeration, which makes the cloth gas uniform and forms vertical To the circulation, the mixing and mixing are more uniform; the aeration hose has small bubbles, high oxygen utilization rate and high power efficiency. The different design modes of the aerator aeration tube can be used to adjust the working pressure. Different distances and densities can change the working efficiency of the aerator.
The aeration tube assembly is mainly composed of a valve, a venting pipe and a diaphragm tube type microporous aerator. The utility model has the advantages of simple structure, high oxygen utilization rate, reliable performance, no clogging of the pores, no backflow of the sewage, uniform stress in the circumferential direction and long service life. The membrane tube microporous aerator uses EPDM rubber and has tiny self-closing pores on the membrane. When working, the micropores of the aeration tube will automatically open under air pressure, and the air will enter the pool for oxygenation; if the pressure disappears, the micropores of the aeration tube will automatically close, preventing water from flowing back into the micropores. During the sewage disposal process, it can be used after temporary continuous use or decommissioning, and there will be no clogging of the micropores and reflux of the mixed liquid.