How to deal with the overpressure of the microporous aeration aerator

Aquatic aerators, Roots aerators and other products, in terms of aquatic breeding, microporous aeration aerators are often overpressured. In terms of wastewater treatment, the same situation exists. Some customers report that the quality of our products is not good. The problem, in fact, is that there is a problem in the exhaust link. The following will explain how to deal with this problem.

We can make a brief reference. In terms of aquaculture, in many soil ponds, the small holes of the aeration pipes are easily blocked by the soil. Therefore, the Roots blower often occurs in the situation of suffocation and overpressure, not the Roots blower. quality problems. In the industrialized aquatic breeding tank, the situation of suffocation has dropped a lot, the cleanliness of the pool has been improved, and the situation of blocked aeration pipes will be reduced.

In aquaculture, if there is overpressure, we need to tidy up the aeration pipe and arrange it regularly. When the pressure gauge shows an overpressure condition, we need to tidy up the aeration pipe. In sewage treatment, it is necessary to sort out the aeration pans, and screen the pans with excessive damage and sludge, so as to fundamentally solve the problem of fan overpressure.

The aquatic aerator describes the overpressure of the Roots fan, and can add a bypass to achieve the purpose of reducing the pressure. This method is ly aimed at the situation of different types of fans, and the air volume is satisfied, and an outlet bypass can be added to reduce the pressure. Roots blower overpressure is a very risky condition. Overpressure for a long time will greatly shorten the service life of the blower. If there is an overpressure condition, it must be dealt with in time.