How should the oxygenation tube be placed, and where should the oxygenation tube be placed?

How should the oxygenation tube be placed, and where should the oxygenation tube be placed? Today, I will tell you about it, if there is a problem with placement! Generally, in aquaculture, the aeration tube is mainly used together with the aeration tray. The air is exhausted from the bottom, which is often referred to as the microporous oxygenation technology! At present, after many users' use, the aeration effect is good, and the oxygen content in the water body is effectively improved.

In use, the user can use the aeration tube alone, or use it in combination with the gas pan, or make the tube booster by himself. There are no specific requirements for this. Generally, 3-4 aeration pans are recommended per acre. If it is totaled to the tube It can be understood that about 25-35 meters is enough. If it is a pond with a high breeding density, you can use a little more.

If it is used alone, it is recommended not to let the extension pipe directly touch the bottom to avoid blowing the sludge at the bottom to block the air holes. At the same time, after using the microporous oxygenation equipment for a period of time, it needs to be cleaned regularly for the sludge in the pool! In this way, the packaging and outgassing effect can be smooth.

The specifications of the aerators are mainly 16*10mm, 25*12mm, 20*10mm, 25*16mm, these are the models that users use more in their daily lives. When users use them, they should choose according to the depth of their own pools. If it is used in a shallow pool, 16*10mm high density can be used, and if it is a deep pool, 25*12mm low density can be used, because the resistance of the air outlet is also different with different wall thicknesses! Especially for small aerators, it is recommended to use a thinner wall to get a better effect!