How to install a whirlpool pump

Prudent approach create efficient work, scientific approach provide effective data, high-quality products build "Jinhulongbrand.

LEARN MORE

How to install a whirlpool pump

Update:03 Sep 2020
Summary:

The vortex air pump is widely used in the machinery ind […]

The vortex air pump is widely used in the machinery industry. Its impeller is composed of dozens of blades. During the movement, it operates in a circular manner. In use, it has many advantages. Because of its relatively small size and very light weight, it brings great convenience to the work of the operator. Of course, its good operation can only be implemented on the basis of correct installation. Therefore, the operator must install it correctly before using the vortex pump.

 

First of all, before installing the vortex air pump, it needs to be placed in a ventilated and messy location to avoid the humidity of the surrounding environment from affecting the use of the equipment. At the same time, it needs to be placed in a stable place without any tilt.

 

Secondly, when installing, you need to pay attention to the rotation direction of the impeller of the vortex air pump and the direction on the arrow of the fan. If the installation direction is wrong, the vortex air pump will not be able to operate.

Then, the working pressure of the vortex air pump should be taken into consideration, and it should not exceed 8kpa to avoid the excessive heat generated by the fan from affecting the use of the vortex air pump.

 

Finally, pay attention to the installation position of the bearing. The bearing can be installed in the middle of the pump cover, or it can be installed in the pump body. The difference between the two installation methods also makes the operators use different maintenance methods when maintaining the vortex pump.

 

The vortex air pump has a wide range of uses. After it is installed in the correct way, it can perform well in normal use, allowing it to provide more help for the work.